Xiaomi Redmi 6 Pro Test Point For EDL Mode And FRP,Mi Account Reset Done

We will show you the method to Unbrick Xiaomi Redmi 6 Pro Test Point mode. Previously it is familiar as Emergency Download (EDL) mode.  This is a highly developed procedure user choose this technique to bypass the unlocked bootloader. There may be a condition when your Android device was in bootloop condition or bricked, but the bootloader has not been still unlocked. This condition will force you to use the Test Point process. It would be not possible to unlock the bootloader because the device is bootlooped or bricked.

Xiaomi Redmi 6 Pro Test Point For EDL Mode

Xiaomi Qualcomm phones have a particular bootmode that allow us to flash a device firmware.  To confirm you successfully booted to EDL Mode, connect your phone to a Windows computer and check the device manager. Xiaomi presents a particular tool to unbrick phones. You can use this tool without any troubles to unbrick or flash the dead devices.  The developers offer some remote service to flash and unbrick your device. You have to arrange all Mi-Flash, EDL, Firmware Download, QDLoader.

Requirements for Xiaomi Redmi 6 Pro EDL Test Point 

·         RedNot4X device

·         USB data cable

·         Latest Mi Flash tool

·         1.5 screwdriver

·         Plastic Crowbar

·         Plastic Prying Tools

·         Anti-static angle tweezer

·         A Windows-based PC or laptop

·         64-bit system is better if you can

·         MIUI Fastboot ROM tgz file

·        Qualcomm USB QDLoade driver 

The Steps to Unbrick your Phone

Step 1: Disable the Windows Driver Enforcement device.

Step 2: extract the Mi Flash tool .zip file in your computer.  Put Double click on the Mi Setup .exe file to install the software. This tool will able to identify your phone.

Step 3: Next, switch off your phone

Step 4: take out the SIM tray with the ejector pin.

Step 5: You will require opening your device back cover.

Step 6: Disconnect the battery connector types of equipment.

Step 7: Connect the USB data cable to your android phone

Step 8: Apply a sharp pointed Angle Tweeze

Step 9: Plug in your USD data Cable into your computer quickly while keeping the Test Points short correctly.  Windows system will give a notification you if any new device is connected. This will download the essential driver under the Ports COM & LPT for the Qualcomm HS-USB QDLoader 9008.

Step 10: Now, take away the angle tweezer.

 

That’s it now your phone is in EDL mode or Test Point.

You can carry on at this stage to advance anything you are going to do. Usually, most of the users desire to fix their bricked phone by flashing MIUI ROM or reinstalling again.

Xiaomi Redmi 6 Pro FRP Reset Done

Flashing MIUI ROM

Step 11: open Mi Flash tool. The tool will identify your device.

Step 12: Now Extract the MIUI fast boot ROM file.

Step 13: Check the ROM files location and confirm the “Clean All” option is checked.

Step 15: Put a click on the Flash option for installing the MIUI ROM.

Step 16: after successfully complete, the operation a Success message will appear 

Rating This Post
5/5

Xiaomi Redmi 6 Pro Test Point For EDL Mode And FRP,Mi Account Reset Done

File Information

File NameXiaomi Redmi 6 Pro Test Point For EDL Mode And FRP,Mi Account Reset Done
Allternative NameXiaomi Redmi 6 Pro EDL Mode Test Point
File Size76 KB
File Typemi_redmi_6_pro_edl_test_point/zip-compressed
File ExtensionZip extension

Download Information

File PasswordNo Password
Uploaded DateApril 19, 2019
Uploaded LocationChicago/USA
Uploaded ByJohn Mason
Uploaded ForZip/compressed file
CompatibilityWindows 7/8/8.1/10/Vista Supported
Download TypeMediam Fast Download
Virus StatusScanned By Norton

Share Information

File URLhttps://up-dl.net/xiaomi-redmi-6-pro-test-point/
HTML Code

Leave a Comment